Software Versions and Updates Information

2.4

The best solution for FBS4 module replacement just got better with the new update to the FBS4 manager (MN032) license. New modules added for making virgin, personalization, as well as extraction of current personalization data.
With the upcoming update we provide our customers who currently have the MN032 license and a valid AMS with the ability to perform the following tasks for the control units of the FBS 4 type installed in Mercedes- Benz vehicles. The newly added modules include:
 
•    ECU CRR1(SID307) and CRR1+(SID310) – Done completely by OBD.
•    ECU MRD1, MRG1 (manufactured up to 2021) – Bench connection using ZN051 Distribution box and EP003 are required.
•    ECU CRR2 (MD1CS006) – Bench connection using ZN051 Distribution box and EP003 are required.
•    ECU MED41 (MED17.7.7) – Bench connection using ZN051 Distribution box and EP003 are required.
•    Transmission Control Unit VGSNAG3 (9-Gear) - Bench connection using ZN051 Distribution box and EP003 are required.
•    Transmission Control Unit VGSDCT (Dual Clutch Transmission)- Bench connection using ZN051 Distribution box and EP003 are required.
•    Direct Shift Module (DSM) – ABPROG (ZN030) is required to connect to the module’s microcontroller and read data directly from it to extract the data and use it with the Abrites online software.
 
One of the many benefits of this update is that when adapting transmissions, we do not simply clone them. Instead, we only transfer the necessary data and you do not lose the calibration values which helps you to avoid this tedious process, saving you time and money.
Another important information regarding this update is the fact that the modules above have not been available for renewal before. Up until this update there has been no way to work with used modules and now this will all be available for AVDI customers who have the needed software and hardware.

10.0

In version 10.0 of the ABRITES Diagnostics for Ford, we have now added the ability to program keys to the latest Ford vehicles, manufactured after 2021. Using the new FR011 license and the ZN085 ABRITES RH850/V850 Programmer you can now program keys to the latest Ford models, including the F150 2021+, Maverick 2023+, and Mustang Mach-e 2021+, equipped with RH850 processors.
 
The ground-breaking ZN085 ABRITES RH850/V850 Programmer steps in to help you read information from the RH850 processor and then use it to program keys based on the dump.
AVDI with active AMS and the FR008 license are required to complete the procedure

34.6

In the latest version of the ABRITES Diagnostics for BMW vehicles Online, we have added support for key programming for BDC versions 85 and higher, by OBDII. This is accessible via the new BN015 license.
New BDC versions are supported for key programming by dump of eeprom, as well. As a result, all new BMW models are now supported for key programming by dump (using BN013) and by OBDII (using BN015).
Mileage recalibration can be performed by dump of eeprom, using the BN013 license.
AVDI with active AMS is required.

34.6

Starting with version 34.6 of the ABRITES Diagnostics for Subaru, our team has added key learning smart system reset support for Subaru BRZ 2022+ (and derivative models) as well as other Subaru 2020+ models using a keyless DST AES key.  

The following capabilities are now accessible via the new SB002 license:
- Key registration ALL KEYS LOST and additional key programming. Also programming the key to the ECU.
- Erasing keys (erasing all but the current key)
- Reading number of keys
- Smart system reset and adaptation

AVDI with active AMS is required, as well as the SB001 license.

34.6

With version 34.6 of the ABRITES Diagnostics for Hyundai/KIA vehicles, we introduce the latest ABRITES software license for Hyundai/KIA vehicles – HK012 Hyundai/KIA VIN Calibration, all by OBDII.
The new functionality allows you to set the Vehicle Identification Number of certain modules – Engine Control Unit and dashboard, in a selection of models. This license is developed to save time and resources, allowing you to effortlessly adapt new and second-hand modules for a wide range of vehicles from the group. The HK012 is one of many ABRITES solutions, offering functionalities not available even in the OEM software tools.
The supported vehicles’ list is abundant.
Most nonelectric models with Kefico UDS Engine Control Module (ECM) are supported for VIN calibration. These include, for example, Hyundai i10, i20, i30, and many more to be added soon. Using the HK012 you can easily recalibrate the VIN of the ECM and adapt a used module.
As for the electric vehicles, which are normally equipped with a Vehicle Control Unit (VCU), HK012 offers support for ALL of them, produced so far – Hyundai Kona and Ioniq, and KIA Soul and Niro.
Dashboard VIN calibration is available for models, equipped with digital dashboards, such as the Hyundai Kona, Hyundai Tucson and KIA Niro. More models will be added soon.
AVDI with active AMS is required.

9.2

In version 9.2 of the ABRITES Diagnostics for FCA we have added support for more models for instrument cluster calibration:
•    Jeep Wrangler (JL) 2018+, Jeep Gladiator (JT) 2020+, Maserati Levante, Jeep Grand Cherokee (WK2) 2011-2022, Dodge RAM (DT) 2019+
This is available in the FN013 license via the Offline diagnostics menu under Cluster calibration 2.
The CB019 FCA Secure gateway cable is needed to complete the procedure. AVDI with active AMS is required.

34.6   

In the latest version of the ABRITES Diagnostics for PSA vehicles Online, we have added key learning support for the following 2022-2023 models:
•    Peugeot 3008 II Hybrid, Peugeot Expert, Citroën C5 Aircross
We have also added support for the following 2022-2023 Opel models:
•    Corsa F, Combo E  
This is free for all owners of the PN018 license. AVDI with active AMS is required.

34.6   

In version 34.6 of the ABRITES Diagnostics for Toyota, Lexus, and Scion vehicles Online, we have added general diagnostics capabilities – complete module scan, read/clear DTCs, live data display, for newer models.
Also, we have:
- Added Airbag 2020+ clear crash, and read/write DFLASH
- Added support for Aygo X 2022+, Yaris GR 2021+ , and Corolla GR 2022+ models to the TN014 license
- Added support for Prius WX60 2022+ and BZ4X 2022+ models to the TN015 license
 
And finally, we are happy to introduce the new Lexus license – TN016, offering support for for Lexus RX 2022+, Lexus NX 2021+, Lexus LX 2021+, as well as all the previous models, supported by the legacy TN013 license. The CB012 is needed to complete the procedure. AVDI with active AMS is required.

34.6 

In version 34.6 of the ABRITES Diagnostics for Renault vehicles Online, our team introduces a new license RR027. This license allows you to program keys in ALL KEYS LOST situations and add spare keys to Dacia vehicles, manufactured after 2020 equipped with Marelli UCH. The RR027 is the updated and enriched iteration of the RR023 license and will replace it.
 
Supported models include:
•    Dacia Logan III 2020+ with mechanical key
•    Dacia Sandero III 2020+ with mechanical key
•    Dacia Jogger 2021 with mechanical key
•    Renault Taliant 2020+ with mechanical key
•    Renault Trafic III Ph2 2020+ with mechanical key
 
Keyless vehicles are already supported by the RR022 for spare key, and the RR026 in case of ALL KEYS LOST situations. CB012 or CB021 cable is needed to complete the procedure.
We have also has added support for mileage recalibration of Master III Ph2 2019+ (IC by OBD and DAB by dump). This is free for all owners of the RR016 license.
Coverage of Clio V/Captur II/New Zoe for milеage recalibration, accessible via the RR025 license, is improved.
AVDI with active AMS is required.

4.4

In version 4.4 of the ABRITES Diagnostics for Jaguar and Land Rover vehicles, we have added the possibility of restoring programmed keys.
You can find this option in the Special function menu under “Abrites key restore”. After that, you need to connect the PROTAG programmer, and the software will guide you through the procedure.
AVDI with active AMS, and PROTAG ZN003 are required.

11.12

In the new version of the ABRITES TagKeyTool, we have added support for the following keys in the Key Cloner, accessible without any license via the TagKeyTool menu:
•    HITAG-AES Toyota keys BA/B9 – using the TA64 ABRITES key
•    DST-AES Toyota keys BA/B9 – using the TA68 ABRITES key
 
Also, we have added new capabilities in the Key Inspector (KT011) license:
Reading the following data from BMW G-Series keys:
•    VIN (current/initial)
•    Odometer
•    Last drive
•    Fuel
•    Battery voltage
•    Shipping
•    Temperature (coolant/outside)
•    Color code
•    Upholstery code
•    Remote frequency
•    Display key/ no display
 
Reading the following data from Audi A6/A7/A8 BCM2 keys (keyless):
•    Odometer
•    Hardware/software version
•    Key date of production

Support for production of SsangYong keys by dump of 29f40 memory, is added, as well, no license needed. AVDI with active AMS is required.

34.6 

In the new version of the ABRITES Diagnostics for VAG vehicles Online, we have added VIN customisation in the Immo V adaptation procedure. You are now able to enter a custom vehicle identification number when performing module adaptation.
Also, in the Immo V adaptation menu you will see two new checkboxes: Keyless and Electric vehicles. Make sure you tick them off when working with keyless, and/or EVs.
This is accessible with the VN002 license. AVDI with active AMS is required.

34.6 

In the latest version of the ABRITES Diagnostics for Porsche vehicles Online, we have added a new functionality in the Dump tool:
•    Reading mileage and moto hours from dump of ME7.xx eeprom ECUs
This is accessible with the PO009 license under the Dump tool menu AVDI with active AMS is required.

Updating to the latest ABRITES software version will give you access to the functionalities, included in the ABRITES V850/RH850 Programmer.

Using the new VN021 license, you can add a spare key or exchange the instrument cluster of VAG MQB vehicles with Megamos-AES keys (requires Immo data from both the donor, and the replacement modules). This is possible by extracting various Immo data by dump of RH850 processors, such as Component Security bytes, MAC address, Keys info, and PowerClass of the vehicle.

AVDI with active AMS is required.

34.5

In the latest online version of the ABRITES Diagnosics for BMW vehicles, we are introducing new functionalities for the latest models of BMW bikes:

- Added support for more software versions, key programming capabilities for keyless models and module replacement for Immobilizer modules (EWS4 and hands-free module (HUF)).

Also, the procedure via the EWS Manager in the BMW online software is now improved and more intuitive.

These functionalities are accessible using he BN013 license. AVDI with active AMS is required.

34.5

In the latest version of the ABRITES Diagnosics for Toyota vehicles, we are introducing new key programming functionalities for the latest models.
Using the TN014 license, you can program keys in All Keys Lost situation or add spare keys for models, manufactured after 2020, equipped with Tokai Rika Smart Systems and BA type HT-AES keys.

Supported models:
•    Yaris 2020+ (XP210)
•    Yaris Cross 2021+ (XP210)
•    Corolla Facelift 2022+ (E210)
•    Corolla Cross Facelift 2022+ (XG10)

Including the models, already supported in the TN011 legacy license:
•    Corolla 2018+ AA HT-AES
•    Camry 2018+ A9 DST-AES
•    Highlander 2018+ AA DST-AES
•    Mirai 2020+ AA DST-AES
 
Using the TN015 license, you are now able to program keys in All Keys Lost situation or add spare keys for models, manufactured after 2020, equipped with Denso Smart Systems and BA type DST-AES keys.

Supported models:
•    Sienna 2020+ (XL40)
•    Harrier/Venza 2020+ (XU80)
•    Tundra 2021+ (XK70)
•    Land Cruiser 2021+ (J300)
•    RAV4 Facelift 2022+ (XA50)
 
Including the models, already supported by the TN012 legacy license:
•    CH-R 2018+ A9 DST-AES
•    Prius 2018+ A9 DST-AES
•    Avalon 2018+ AA DST-AES
•    RAV4 2018+ AA DST-AES
 
We have also Improved the support for Australian models, included for free in the functionalities of the TN014 and TN015 licenses.
Keep in mind, that an AVDI with active AMS is required.

34.5

In the latest version of the ABRITES Diagnosics for Renault vehicles online, we have added support for more models, as follows:
-    New Clio V/Captur II/New Zoe versions for mileage recalibration
This functionality is accessible for free for all owners of the RR025 license.

We have also added:
-    Edit config/save to file/restore from file of the newer models in the basic diagnostics.

AVDI with active AMS is required.

34.5

In the latest version of the ABRITES Diagnosics for Nissan vehicles online, we have added a new functionality:

-    Key learning of the new models with 4-digit PIN with UDS Еngine Control Unit (for example, NT500)  

This is accessible for free for all owners of the NN009 license. AVDI with active AMS is required.

34.5

In the latest version of the ABRITES Diagnosics for PSA and Opel vehicles online, we have added support for the following 2022 models:

-    Citroën C5 Aircross
-    Peugeot 508 II
-    Peugeot 5008 II
-    Peugeot Rifter
-    Opel Vivaro
-    Opel Grandland

This functionality is free for all owners of PN018 license. AVDI with active AMS is required.

34.5

In the latest online version of the ABRITES Diagnosics for VAG vehicles, we have added support for more Simos Continental ECUs for reading CS by bench.

The supported Simos ECUs include:
•    Simos 10.22/10.24
•    Simos 12.2
•    Simos 16.11
•    Simos 18.1/18.2/18.3/18.6/18.10

Furthermore, now Component Security bytes can be extracted by dump of Simos xx.xx ECUs. If you have an available dump file, you will be able to read CS using the Dump tool functionality from the VAG Online software menu.
AVDI with active AMS is required.

34.5

In the latest online version of the ABRITES Diagnosics for Jaguar and Land Rover vehicles, we have improved the key programming procedure for all 2018+ models (using the TA66 key).

11.11

The latest functionality added in the ABRITES TagKeyTool version 11.11 is in regard to BMW bikes. Using the KT011 - Key Inspector license, you can now read the following data from keyless DST-AES keys for these bikes:

•    Production date
•    Place of production (factory number)
•    VIN of key

In order read this information from the key, you will need the PROTAG Programmer (ZN003), in which you need to place the key for the procedure.
Also, AVDI interface is required, in order to access the software

11.11

In version 11.11 of the ABRITES Diagnosics for Mercedes-Benz vehicles, we have improved the EZS/EIS password extraction, personalization, and virginisation procedures.

It can be done using either the ZN036 IR adapter (ABPROG) or the latest ZN076 USB IR adapter. The new adapter makes the procedure significantly faster to perform. Using the ZN076 you will also be able to emulate IR keys.

This functionality is accessible via the MN032 DAS Manager license. AVDI with active AMS is required.

34.3

With version 34.3 the ABRITES Diagnostics for FCA vehicles is now online!
With the this version of the software, we are also releasing a brand-new license – the FN023 – Vehicle Module Synchronization.
Using the FN023, you can synchronize the vehicle identification number of modules, unrelated to the immobilizer. It is an easy and risk-free procedure for exchanging second-hand modules, such as ABS, distronic, electric power steering, and many more.

With this update, we have also added a new functionality for coding and configuration change in FCA vehicles for the US market - Jeep Wrangler, Gladiator, Grand Cherokee, Dodge RAM, Charger, Challenger, and more models. It is available to all FN021 owners, who update to the latest software version.

AVDI with active AMS is required.

34.3

In the ABRITES Diagnostics for VAG Online 34.3 we have added new functionalities.

- IMMO OFF for DQ200 and DQ250 Transmission Control Units;
- Checksum correction of Program Flash in Simos 8, Simos 10, Simos 12, Simos 16, Simos 18, Simos 18.1, Simos 18.2 Engine Control Units;
- Component Security bytes extraction by Dump from Simos 10.12, Simos 12.1, Simos 12.2, Simos 18.1 Engine Control Units;

AVDI with active AMS is required.

34.3

In the latest update of the ABRITES Diagnostics for Porsche Online we have added Dump Tool functionality.
It allows Component Security bytes extraction from Simos SDI 10.2 and Simos SDI 7 Engine Control Units. AVDI with active AMS is required.

34.3

In this version of the software, the latest functionality for resetting used keys to new is included!
With version 34.3 and the HK011 license, you can reset to new keys, programmed to Hyundai/KIA vehicles with HITAG 3, HITAG AES, DST AES, and DST 80 transponders.

AVDI with active AMS is required.

34.3

In version 34.3 the speed limit calibration functionality is made available in the basic software.

Update to the latest version of the ABRITES Diagnostics for Mercedes-Benz Online and you will be able to set the speed limit of vehicles with CEPC 253, for example the Mercedes-Benz eVito vans.
Via the Special Functions menu in the ABRITES Diagnostics for Mercedes-Benz vehicles, you can set the speed limit choosing from a dropdown menu of preset values.

This functionality is available to all AVDI users with active AMS as a part of the basic AVDI software for Mercedes-Benz.

AVDI with active AMS is required.

TAGKEYTOOL

11.11

In the latest update of the ABRITES TagKey Tool we have made a few improvements in overall user experience.
All PROTAG owners with the latest version will be able to enjoy better flowing key-related procedures.

AVDI with active AMS is required.

8.9

With version of 8.9 the ABRITES Diagnostics for FCA vehicles you are now able to prepare transponders for Fiat Ducato, Iveco Daily and Fiat 500L, manufactured after 2020. You need to read the external EEPROM from the BCM module using the ABPROG Programmer, then load the file in the Transponder Maker to prepare a key. The prepared key can then be programmed via the Key Learning menu. This functionality is available for all AVDI users with FN017/FN020/FN022 licenses and active AMS.
 
Also, in version 8.9 we have added support for Cluster calibration in analogue dashboards of Jeep Renegade 4xe (Hybrid) and Jeep Compass 4xe (Hybrid).
This functionality is accessible for all AVDI users owning the FN013 license and active AMS.
 
You are now also able to virginise HITAG2 transponders via the Key Learning menu.
And finally, you can read and write the EEPROM of BCM Marelli modules equipped with NEC70F3633 controllers and EEPROM 95320.

Added support for automatic PIN code extraction and key programming by OBDII for a selection of Ferrari models:
• 612
• FF
• 599
• F12
• 458
• California
This will be accessible for FREE via the ABRITES Diagnostics for FCA vehicles for AVDI users with active AMS.

AVDI with active AMS is required.

6.1

With the new update of the ABRITES ECU Programming Tool you will be able to access the following functionalities For Mercedes-Benz VGSNAG3 9G-tronic and VGSNAG2-FDCT gearboxes:
• Read and write PFLASH, MAPS and DFLASH
• Automatic checksum correction when writing a modified PFLASH/MAPS
With the latest updates, we have also added support for CPC/CEPC DELPHI read and program FLASH in Mercedes-Benz and Smart vehicles.
These functionalities are available for all AVDI users who own the EP001 license and active AMS.

With the latest update of the ABRITES Diagnostics for Mercedes-Benz Online you can calibrate the speed limit of Mercedes-Benz eVito vans.
This functionality is available for FREE for all AVDI users with active AMS. No additional licenses required!
General improvements in FBS4 Manager concerning “virgin” functionality and ability for reading and programming of personalization data for ECUs DELPHI CRD3 (both type of ECUs are supported TC1797 and TC1793).
Additional function is now available for quick programming of engine control units with CFF files.

7.8

In the latest update of the ABRITES diagnostics for General Motors we have added support for 2017+ Opel Insignia B mileage recalibration.
This functionality is FREE for all AVDI users who own the ON014 special function and active AMS.

AVDI with active AMS is required.